|
NetworkingGear CISCO WS-X6248 6000/6500 Module Highlights Flexible enough to meet your exact needs CISCO WS-X6248 - Excellent Condition Tested by a Cisco Certified Network Asscociate (CCNA) This module is in excellent physical condition, all ports and connectors are intact. This module has been tested and all ports are working. Product Information: Product Description Cisco Switching Module switch - 48 ports Device Type Switch Form Factor Plug-in module Ports Qty 48 x Ethernet 10Base-T, Ethernet 100Base-TX Data Transfer Rate 100 Mbps Data Link Protocol Ethernet, Fast Ethernet Remote Management Protocol SNMP 1, SNMP 2, RMON, SNMP 3 Communication Mode Half-duplex, full-duplex Features Auto-negotiation Compliant Standards IEEE 802.3, IEEE 802.3U System Requirements Cisco IOS Cisco Internetwork Operating System Software IOS (tm) s222_rp Software (s222_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF10a, RE LEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Wed 19-Sep-07 11:54 by kellythw Image text-base: 0x40101040, data-base: 0x42939BA0 ROM: System Bootstrap, Version 12.2(17r)S1, RELEASE SOFTWARE (fc1) BOOTLDR: s222_rp Software (s222_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF10a, RE LEASE SOFTWARE (fc1) Router uptime is 2 minutes Time since Router switched to active is 2 minutes System returned to ROM by power cycle (SP by power-on) System image file is "disk0:s222-ipservices_wan-mz.122-18.SXF10a.bin" cisco WS-C6506 (R7000) processor (revision 2.0) with 458752K/65536K bytes of mem ory. Processor board ID TBA04230681 R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache Last reset from power-on SuperLAT software (copyright 1990 by Meridian Technology Corp). Router uptime is 2 minutes Time since Router switched to active is 2 minutes System returned to ROM by power cycle (SP by power-on) System image file is "disk0:s222-ipservices_wan-mz.122-18.SXF10a.bin" cisco WS-C6506 (R7000) processor (revision 2.0) with 458752K/65536K bytes of mem ory. Processor board ID TBA04230681 R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache Last reset from power-on SuperLAT software (copyright 1990 by Meridian Technology Corp). X.25 software, Version 3.0.0. Bridging software. TN3270 Emulation software. 1 Virtual Ethernet/IEEE 802.3 interface 48 FastEthernet/IEEE 802.3 interfaces 2 Gigabit Ethernet/IEEE 802.3 interfaces 381K bytes of non-volatile configuration memory. 32768K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102 Router# Router#sh mod Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2 SAL08496W13 2 48 48 port 10/100 mb RJ45 WS-X6248-RJ-45 SAL06172WZ0 Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 0006.d65f.489c to 0006.d65f.489d 5.2 7.1(1) 12.2(18)SXF1 Ok 2 0009.1263.ded8 to 0009.1263.df07 6.1 5.4(2) 8.5(0.46)RFW Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Policy Feature Card 2 WS-F6K-PFC2 SAL085076WH 3.5 Ok 1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL085074QC 2.9 Ok 2 Inline Power Module WS-F6K-PWR 1.0 Ok Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass Router# What you will receive: Quantity 1 CATALYST 6000/6500 SERIES - CISCO WS-X6248 Module Benefits of buying from Networkinggear: Reliable, Fast Service from a Vendor that Cares. We truly try to be the Best. Store Policy: We take great care of our customers. If you have any problems with your order, do not hesitate to contact us at admin@networkinggear.net. It is our policy to leave positive feedback for every buyer that leaves us positive feedback. If you could, please rate your experience with our company (networkinggear) at Ebay.com to help other shoppers in deciding whether or not to purchase from us in the future. Your bid is based on shipping costs using FedEx ground. If you need another shipping option, contact us via e-mail to determinate additional costs. Warranty: Unless otherwise stated, we provide a 30 day warranty from the date of receipt to review it for any defect or deficiency. We personally test and guarantee every item we sell. If your item arrives and does not work we will replace it or refund your money, including shipping costs. Product Support: When you receive your order, please inspect all packages for items such as remotes, manuals and cables, or any applicable accessories for the product(s) ordered. Please be sure to save the box, the shipping carton, and its packing material in the unlikely event that you will need it for a return shipment. If you require any additional assistance with setup, find that a part may be missing, or if the unit is not operating as you expected, please contact us at admin@networkinggear.net and provide a brief explanation of the issue. Contact Information: If you have any questions or concerns please e-mail us at admin@networkinggear.net. Shipping and Handling Networkinggear ships worldwide (US and International). We will ship within two business days. Buyer pays all shipping charges. U.S. Shipping Our Free shipping fee for the U.S. is for the lower 48 states. Hawaii, Alaska, and U.S. Territories please contact us for a shipping quote. You are welcome to use your own FedEx account, after item is paid for. International Shipping International Customers please contact us for a quote. You are responsible for any duties, tariffs, import taxes, or any fees that your country charges to receive items from the U.S. You are welcome to use your own carrier to ship your item, after item is paid for. International orders may be subject to local customs and duties, for which Buyer is solely responsible. To prepare item and documents for international shipping, allow 2 business days before item will be shipped.
Place a Bid!
|